isd page

Microcomm's Aceleration Sensor Series MI-3160-1000 are designed with a very low mass, these sensors are ideal for high frequency applications. The 1000 sensors are electrically isolated and available with or without a mounting stud.

All model 1000 sensors include integral cables with 10-32 coaxial connectors. Models 1000 and 1000B utilize a 6-36 mounting stud; the 1000A is mounted with adhesive

Microcomm's Aceleration Sensor Series MI-3160-1018-1019 is general purpose sensor ideal for laboratory shaker testing, high frequency measurements and production screening. Its features include high frequency and low noise performance. Models are available in IsoShield (1018) and case ground (1019) versions. Sensors include a 10-32 x .2" mounting stud; integral on 1018 versions, and removable on 1019 versions. The 1019C version extends performace to 350°F (177°C).

Microcomm's Acceleration Sensor Series MI-3160-1020S is ideal for laboratory testing applications which require high output, low noise and wide frequency range. Several models are available to accommodate a variety of applications.

All sensors include integral 1/4-28 mounting stud except the model 1026 which includes a 10-32 stud. Models 1022 and 1022LF feature BNC connector; model 1024-4 features underwater operation to 1000 psi.

Microcomm's Acceleration Sensor Series MI-3160-1030 are Originally designed specifically for the U.S. Geological Survey, this sensor provides ultra-low frequency and ultra-low noise with very high output.

The Model 1030 is ideal for making high resolution structural and floor vibration measurements for sensitive equipment such as electron microscopes, micro-lithography for semiconductor fabrication, micro-machining and more. It includes a removable 1/4-28 mounting stud.

Sensitivity minimum @50Hz

Microcomm's Acceleration Sensor Series MI-3160-1136 The Model 1100 series accelerometers offer high reliability in industrial environments. These sensors have an integral PVC cable that provides strain relief for superior flex and pull strength. They are available with a top or side exit configuration.

Low profile design, thermal boot and watertight construction make these sensors perfect for moderate to harsh applications. All models include a 1/4-28 removable mounting stud to facilitate installation.

Sensitivity ±12% @ 100Hz

Microcomm's Acceleration Sensor Series MI-3160-1800 are General purpose accelerometers, the 1800 Series were designed for use in many tough locations. They are rated for underwater use with up to 100 foot depth. Stainless steel body and hermetically sealed sensor make the 1800 ideal for paper machines, air handling equipment and heavy machinery. These accelerometers come with a 2-year warranty and NIST traceable calibration.

Sensitivity @ 100 Hz, ±20%

Microcomm's Acceleration Sensor Series MI-3160-CBM2000 is the first accelerometer to be designed for use on outdoor structures and other harsh, low frequency applications.

This sensor features a low frequency response, high sensitivity, rugged sealed industrial design and internal electronics for cables up to 1000 feet long. The CBM-2000 includes two 10-32 mounting throughbolts.

Sensitivity @ 100 Hz, ±5%

Microcomm's Acceleration Sensor Series MI-3160-3000 (triaxial accelerometer) is ideal for light-weight single-point monitoring of vibration in three planes (x-y-z). It has an exceptionally low 10 micr-volt noise floor, a 10 gram total weight and % frequency response out to 7 kHz.

The three accelerometer channels are electrically isolated from the titanium mounting block. The mounting block comes with a 10-32 stud that is removable.

Two different cable options are offered: a three-conductor shielded cable with a four-pin connector at each end, and a four-pin connector to three individual 10-32 connectors (one for each axis).

Sensitivity @ 100 Hz, ±5%

Microcomm's Acceleration Sensor Series MI-3160-4000 of EEPE (External Electronic Piezo-Electric) accelerometers are designed with external circuitry to be used in elevated temperature environments where standard IEPE or ICP accelerometers will not function. Generally, above temperatures around 350 degrees F (176°C), EEPE accelerometers (also known as Charge-Type) sensors should be used. All of these sensors are used with the model CA-XX charge amplifier series.

The model 4002 features an integral hardline cable, and a triangular mounting base, for operation to 900°F (482°C).

Sensitivity @ 100 Hz, ±10%

Microcomm's Acceleration Sensor Series MI-3160-5102 was designed for industrial applications and low rpm machinery requiring low frequency response combined with high sensitivity. It features a rugged top-mounting 2-pin mil-style connector, internal electrical isolation, and welded stainless steel construction.

This accelerometer is designed with the piezo-electric crystal in shear mode, virtually eliminating base strain, thermal transients and other phenomena that are accentuated at low frequencies. It is supplied with a removable, 1/4-28 stud. An optional 2-pin to BNC cable is available.

Sensitivity @ 100 Hz, ±5%

Microcomm's Acceleration Sensor Series MI-3160-5300 is a rugged tri-axial accelerometer that is capable of measuring vibration simultaneously in three axes. It provides a 100 mv/g signal with a 25 microvolt noise floor per axis.

This model features three independent, isolated accelerometers mounted in a rugged mounting block. The signals are brought out through a single 4-pin connector located on the top of the unit. A single 1/4 x 28 mounting bolt is provided for mounting.

Sensitivity @ 100 Hz, ±5%

Microcomm's Acceleration Sensor Series MI-3160-6036 (accelerometers) feature splashproof construction, a top 2-Pin MIL style connector, and 1/4-28 mounting stud. The premium model 6036 is suitable for production critical equipment, where high performance is required.

The economy 6045/6050 units offer a broad frequency range and low cost for applications requiring multiple sensors.

Sensitivity @ 100 Hz, ±5%

Microcomm's Acceleration Sensor Series MI-3160-7002 are rugged electron-beam welded sensors include a stainless steel housing and injection-molded composite construction. Their compact design permits mounting in tight spaces.

Perfect for general machinery, for frequencies between 300 to 300,000 CPM, the 7002 includes a 10-32 center throughbolt for easy mounting.

All 7002 models include integral cable assemblies for excellent water and chemical resistance. The 7002 series sensors come with a full 2 year Warranty.

Sensitivity @ 100 Hz, ±10%