iiii
iiii
Industrial Sensors
  Pressure Sensors
MI-3120-PRS
  
  Amplified Pressure Sensors-MI-3120-HCX      
Microcomm's Amplified Pressure Sensor Series MI-3120-HCX.
Features:
  • Inline pinning for easy PCB-mounting
  • Externally adjustable offset and span
Technical Specifications:  
1. Pressure Ranges        
  Absolute -   0...1 to 0...2 bar
  Differential / Gage -   0...10 mbar to 0...5 bar
  Differential (pressure/vacuum)     0...±5 to 0...±10 mbar
2. Output signal 0.5...4.5 V
3. Non-linearity and hysteresis (typical, combined) ±0.1 to ±0.5 %FSO
 
Applications:  
  • Medical equipment
  • Barometry
  • Instrumentation
  • Control equipment

 

 
Amplified Pressure Sensors-MI-3120-144S  

Microcomm's Amplified Pressure Sensors Series MI-3120-144S are Signal conditioned precision pressure transducers.
Features:
  • Internal supply regulation
  • Precision temperature compensated and calibrated
  • Special calibrations on request
Technical Specifications:  
1. Pressure Ranges      
  Absolute -   barometric pressure ranges,
2. Output signal -   0...5 V
  Non-linearity and hysteresis (typical, combined)     ±0.05 %FSO
3. Pressure connection     tube fitting (Ø 4 mm)  
4. Size without nipples and pins (approx.)     60 x 30 x 16 mm  
Applications:  
  • Medical equipment
  • Barometry
  • Instrumentation
  • Control equipment
 
Pressure Sensors-MI-3120-26PC
Microcomm's Small size pressure sensors series MI-3120-26PC are temperature compensated and calibrated Pressure Sensors for Lightly corrosive Liquids and Gases.  
Features:
  • High impedance bridge
  • Miniature package
  • Different pinning configurations
  • Usable for wet/wet applications
Technical Specifications:  
1. Pressure Ranges      
  Gage / Vacuum - 0...1 to 0...250 psi
  Differential / Gage / Vacuum -   0...1 to 0...250 psi
  Output signal (typical) -   0...100 mV at Vs = 10 V
2. Non-linearity, hysteresis and repeatability (typical, combined) -   ±0.3 to ±0.45 %FSS
3. Pressure connection -   choice of port styles
4. Size without nipples and pins (approx.) -   13 x 9 x 8 mm
Stainless Steel Pressure Sensors -MI-3120-19U  
Microcomm's Stainless Steel Pressure Sensor Series MI-3120-19U devices were developed for pressure applications that involve measurement of hostile media in harsh environments. These sensors will accommodate any media that will not adversely attack 316 stainless steel.

These 19 mm sensors are available for use with either a constant voltage or current source. They feature a variety of pressure connections to allow use in a wide range of OEM equipment.

The 19U series devices are rugged and reliable transducers for use in a wide variety of pressure sensing applications where corrosive liquids or gases are monitored.
Features:  
  • Low cost
  • Isolated
  • Rugged stainless steel
  • Small size
  • Reliable semiconductor technology
 
Technical Specifications:  
1. Pressure Ranges      
  Absolute -
0...15 to 0...500 psi
(0...1 to 0...35 bar)
  
  Gage - 0...3 to 0...500 psi
(0...0.2 to 0...35 bar)		  
  Gage (pressure/vacuum) - -15...15 to -15...100 psi
(-1...1 to -1...7 bar)		  
2. Span (typical)
at Vs = 5 V or Is = 1.0 mA		 - 150 to 200 mV  
3. Offset - <±7.5 mV/V  
4. Thermal effects(typical)  
  Offset - 30 µV/V/°C  
  Span - +720 ppm/°C (const. current)
-2700 ppm/°C (const. voltage)		  
5. Bridge impedance - +3420 ppm/°C  
6. Non-linearity, hysteresis and repeatability(typical, combined)   ±0.1 %FSS  
7. Pressure connection - O-ring sealing, flush mount
G 1/4, 1/4 NPT, 1/8 NPT, 7/16 UNF 		 
8. Size (approx.)   Ø 19 mm  
Stainless Steel Pressure Sensors -MI-3120-13C  

Microcomm's Stainless Steel Pressure Sensor Series MI-3120-13C devices were developed for high pressure applications that involve measurement of hostile media in harsh environments. These sensors will accommodate any media that will not adversely attack 316 stainless steel. This series uses SenSym ICT’s proven piezoresisitive semiconductor sensor chip in an oil isolated housing with an integral ceramic for temperature compensation and calibration. This design has proven to be highly reliable, stable and accurate.

These sensors feature a weld ring collar and special back support ring for high cycle life capability. Parts are available with pressure ranges from 500 psi (cell package only) to 5000 psi and can be used with voltage or current supplies.

  
Features:  
  • Calibrated and temperature compensated
  • Voltage or current supply options
  • Rugged-isolated stainless steel package
  • Reliable semiconductor technology
Technical Specifications:  
1. Pressure Ranges
  Absolute - 0...500 to 0...5000 psi
(0...35 to 0...350 bar)
  Gage - 0...500 to 0...5000 psi
(0...35 to 0...350 bar)
2. Output signal (typical) - ±0.1 %FSS
3. Non-linearity, hysteresis and repeatability
(typical, combined)		   ±0.1 %FSS
4. Pressure connection - O-ring sealing
1/4 NPT, 1/8 NPT, 7/16 UNF
5. Size (approx.) - Ø 19 mm  
Applications:  
  • OEM stainless isolated cells
  
Stainless Steel Pressure Sensors-MI-3120-19C  
Microcomm's Stainless Steel Pressure Sensor series MI-3120-19C devices were developed for pressure applications that involve measurement of hostile media in harsh environments. These sensors will accommodate any media that does not adversely affect 316 stainless steel.

These 19 mm sensors are available for use with either a constant voltage or current source.They feature a variety of pressure connections to allow use in a wide range of OEM equipment.

The 19C series devices are rugged and reliable transducers for use in a wide variety of pressure sensing applications where corrosive liquids or gases are monitored.

  
Features:  
  • Calibrated and temperature compensated
  • Rugged stainless steel isolated package
  • Small size
  • Absolute and gage pressures
  • Reliable semiconductor technology
  
Technical Specifications:  
1. Pressure Ranges        
  Absolute - 0...15 to 0...500 psi
(0...1 to 0...35 bar)		  
  Gage - 0...3 to 0...500 psi
(0...0.2 to 0...35 bar)		  
  Gage (pressure/vacuum) - -15...15 to -15...100 psi
(-1...1 to -1...7 bar)		  
2. Output signal (typical) - 0...100 mV
at Vs = 10 V or Is = 1.5 mA		  
3. Non-linearity, hysteresis and repeatability
(typical, combined)		 - ±0.1 %FSS  
4. Pressure connection - O-ring sealing, flush mount
G 1/4, 1/4 NPT, 1/8 NPT, 7/16 UNF		  
5. Size (approx.) - Ø 19 mm  
Applications:  
  • Industrial Controls
 
Stainless Steel Pressure Sensors-MI-3120-SSC1000  
Microcomm's Stainless Steel Pressure Sensor series MI-3120-SSC1000 are Temperature compensated silicon based Pressure Sensors.
  
Features:  
  • For corrosive pressure media
  • Low temperature drift
  • All welded stainless steel diaphragm construction
  • Really flat diaphragm
  • For hostile environments
  
Technical Specifications:  
1. Pressure Ranges      
  Gage - 0...1 bar  
2. Output signal (typical) - 0...14.5 mV at Vs = 5 V  
3.
Non-linearity and hysteresis, incl. temperature effects
(typical, combined)
 - ±1.0 %FSO  
4. Pressure connection - flush mount  
5. Size (approx.) - Ø 12.6 mm  
Stainless Steel Pressure Sensor-MI-3120-SSC2000  
Microcomm's Stainless Steel Pressure Sensor series MI-3120-SSC2000.
  
Features:  
  • For corrosive pressure media
  • Excellent low temperature drift
  • All welded stainless steel diaphragm construction
  • For hostile environments
  
Technical Specifications:  
1. Pressure Ranges      
  Absolute - 0...35 to 0...350 bar  
  Gage - 0...35 to 0...350 bar  
2. Output signal (typical) - 0...200 mV at Is = 1 mA  
3. Non-linearity and hysteresis, incl. temperature effects
(typical, combined)		 - ±1.0 %FSO  
4. Pressure connection - O-ring sealing, 1/2 UNF  
5. Size (approx.) - Ø 15 mm (O-ring sealing)
Ø 25.4 mm (1/2 UNF)		  
Stainless Steel Pressure Sensors-MI-3120-SSC3000  
Microcomm's Temperature compensated silicon stainless steel pressure sensors series MI-3120-SSC3000.
Features:
  • For corrosive pressure media
  • Excellent low temperature drift
  • All welded stainless steel diaphragm construction
  • For hostile environments
Technical Specifications:
1. Pressure Ranges    
  Absolute - 0...1 to 0...16 bar
  Gage - 0...1 to 0...16 bar  
2. Output signal (typical) - 100 mV at Is = 1 mA  
3. Non-linearity and hysteresis, incl. temperature effects
(typical, combined)		 - ±0.1 %FSO  
4. Pressure connection - O-ring sealing, 1/4 NPT, 1/8 NPT  
5. Size (approx.) - Ø 19 mm (O-ring sealing)
22.2 mm (thread		  
Pressure Transducers-MI-3200-PS2000
Microcomm's Pressure Transducers with mV output for corrossive media series MI-3200-PS2000.
Features:
  • Calibrated and temperature compensated
  • Small size
  • Field interchangeable
  • Reliable semiconductor technology
Technical Specifications:
1. Pressure Ranges    
  Absolute - 0...15 to 0...500 psi
(0...1 to 0...35 bar)		  
  Gage - 0...3 to 0...500 psi
(0...0.2 to 0...35 bar)		  
  Gage (pressure/vacuum) - -15...15 to -15...100 psi
(-1...1 to -1...7 bar)
2. Output signal (typical) - 0...100 mV at Vs = 10 V  
3. Non-linearity and hysteresis, incl. temperature effects
(typical, combined)		 - ±0.1 %FSO  
4. Pressure connection - G 1/8, 1/8 NPT, 1/4 NPT, 3/8 NPT
other connecting threads available		  
5. Size without connectors (approx.) - Ø 34 x 50 mm  
Pressure Transducers-MI-3120-PS9000  
Microcomm's Pressure Transducers with mV output for corrossive media series MI-3120-PS9000.
Features:
  • Calibrated and temperature compensated
  • Small size
  • Field interchangeable
  • Reliable semiconductor technology
Technical Specifications:
1. Pressure Ranges    
  Absolute - 0...15 to 0...500 psi
(0...1 to 0...35 bar)
  Gage - 0...3 to 0...500 psi
(0...0.2 to 0...35 bar) 		 
  Gage (pressure/vacuum) - -15...15 to -15...100 psi
(-1...1 to -1...7 bar)		  
2. Output signal (typical) - 0...100 mV at Vs = 10 V  
3. Non-linearity and hysteresis, incl. temperature effects
(typical, combined)		 - ±0.1 %FSO  
4. Pressure connection - G 1/8, G 1/4, 1/8 NPT, 1/4 NPT
other connecting threads available		  
5. Size without connectors (approx.) - Ø 22 x 47 mm  
Pressure Transducers-MI-3120-ABHP  
Microcomm's Pressure Transducers with mV output for corrossive media series MI-3120-ABHP are High Pressure Transducers.
Features:
  • For corrosive media
  • Calibrated and temperature compensated
  • Flush mount diaphragm
Technical Specifications:
1. Pressure Ranges    
  Absolute - 0...15 to 0...50 psi
(0...1 to 0...3.5 bar)
  Gage - 0...6 to 0...20000 psi
(0...0.4 to 0...1400 bar)
2. Output signal (typical) - 0...100 mV at Vs = 5 V
3. Non-linearity and hysteresis, incl. temperature effects
(typical, combined)		 - ±0.25 to ±1 %FSO
4. Pressure connection - flush mount  
5. Size without connectors (approx.) - Ø 24 x 29 mm  
Pressure Transducers-MI-3120-Mediamate  
Microcomm's Pressure Transducers with mV output for corrossive media series MI-3120-Mediamate are High Pressure Transducers.
Features:
  • For corrosive media
  • Calibrated and temperature compensated
  • Low cost
Technical Specifications:
1. Pressure Ranges    
  Gage - 0...15 to 0...7112 psi
(0...1 to 0...490 bar)
2. Output signal options - 0...50 mV at Vs = 5 V
3.
Non-linearity, hysteresis and repeatability (max., combined)
 - ±0.5 to ±1 %FSO
4. Pressure connection - G 1/8, 1/8 NPT, 3/8 UNF  
5. Size without connectors (approx.) - Ø 25.5 x 21.5 mm  
Pressure Transducers-MI-3120-BTPTU7000  
Microcomm's Miniature pressure transducers for air and non-corrosive gases series MI-3120-BTPTU7000.
Features:
  • Single supply
  • Field interchangeable
  • Rugged aluminium housing
Technical Specifications:
1. Pressure Ranges    
  Absolute - 0...1 to 0...7 bar
0...15 to 0...100 psi
  Gage - 0...25 mbar to 0...7 bar
0...0.3 to 0...100 psi
  Gage (pressure/vacuum) - 0...±70 mbar to 0...±1 bar
0...±1 to 0...±15 psi
2. Output signal options - 0... 5 V, 4... 20 mA
3.
Non-linearity, hysteresis and repeatability (max., combined)
 - ±0.2 %FSO
4. Pressure connection - G 1/8, 3/8 UNF
other connecting threads available
5. Size without connectors (approx.) - Ø 20 x 30 mm  
Pressure Transducers-MI-3120-CTECTU8000  
Microcomm's Pressure transmitters for air and non-corrosive gases series MI-3120-CTECTU8000.
Features :
  • Single supply
  • Field interchangeable
  • Rugged stainless steel housing
Technical Details:
1. Pressure Ranges    
  Absolute - 0...1 to 0...7 bar
0...15 to 0...100 psi
  Gage - 0...10 mbar to 0...7 bar
0...0.15 to 0...100 psi
  Gage (pressure/vacuum) - 0...±10 mbar to 0...±1 bar
0...±0.15 to 0...±15 psi
Vacuum gage - 0...-1 bar
0...-15 psi
2. Output signal options - 0.5...4.5 V, 0...5 V, 0...10 V, 4...20 mA
3.
Non-linearity, hysteresis and repeatability (max., combined)
 - ±0.2 %FSO
4. Pressure connection - G 1/8, G 1/4, 1/8 NPT, 1/4 NPT
other connecting threads available		  
5. Size without connectors (approx.) - Ø 22 x 52 mm  
Pressure Transducers-MI-3120-BTEPTU4000  
Microcomm's Pressure transmitters for air and non-corrosive gases series MI-3120-BTECTU4000.
Features:
  • Field interchangeable
  • Rugged aluminium housing
  • DIN43650A connector
Technical Details:
1. Pressure Ranges      
  Gage - 0...70 mbar to 0...20 bar
0...1 to 0...300 psi
  Gage (pressure/vacuum) -   0...±70 mbar to 0...±1 bar
0...±1 to 0...±15 psi		  
2. Output signal options - 4...20 mA  
3.
Non-linearity, hysteresis and repeatability (max., combined)
 - ±0.2 %FSO  
4. Pressure connection - G 3/8, 1/4 NPT  
5. Size without connectors (approx.) - Ø 30 x 70 mm  
Pressure Transducers-MI-3120-BTEPTEPTU5000  
Microcomm's Differential pressure transmitters for air and non-corrosive gases series MI-3120-BTEPTEPTU5000.
Features:
  • Precision temperature compensated and calibrated
  • Rugged aluminium housing
  • Female 1/8" BSP and 1/8" NPT fittings
Technical Details:
1. Pressure Ranges      
  Gage - 0...25 mbar to 0...10 bar
0...0.3 to 0...150 psi		  
  Gage (pressure/vacuum) -   0...±25 mbar to 0...±1 bar
0...±0.3 to 0...±15 psi		  
Differential 0...25 mbar to 0...10 bar
0...0.3 to 0...150 psi
0...±25 mbar to 0...±1 bar
0...±0.3 to 0...±15 psi		  
2. Output signal options - 1...6 V, 4...20 mA, 0...10 V square rooting  
3.
Non-linearity, hysteresis and repeatability (max., combined)
 - ±0.2 %FSO  
4. Pressure connection - G 1/8, 1/8 NPT  
5. Size without connectors (approx.) - Ø 40 x 72 mm  
Pressure Transducers-MI-3120-MLH  

Microcomm's Pressure transmitters for corrosive media series MI-3120-MLH. The MLH pressure transmitters offer low-cost pressure measurement from 4 to 600 bar (50 to 8000 psi). The transmitters can be used with a wide variety of industrial pressure media and are protected from harsh environments by a rugged, compact construction. They feature a high electromagnetic capability up to 200 V/m. Due to the modular concept of the MLH series, a wide choice of industrial pressure connections and electrical terminations can be offered.

MLH pressure transmitters are ideal for industrial applications such as pumps and compressors, HVAC and refrigeration, engines, brake systems and general measurement of hydraulic fluids and pneumatics.

Features:
  • Variety of current and voltage output signals
  • Excellent media compatibility
  • High electromagnetic capability (up to 200 V/m)
  • Wide choice of pressure connections and electrical terminations
Technical Details:
1. Pressure Ranges      
  Gage - 0...4 to 0...600 bar
0...50 to 0...8000 psi		  
2. Output signal options - 0.5...4.5 V, 4...20 mA, 1...6 V, 1...5 V, 0...50 mV  
3.
Non-linearity, hysteresis and repeatability (max., combined)
 - ±0.25 %FSO  
4. Pressure connection - G 1/4, G 1/8, 1/4 NPT, 7/16 UNF
other connecting threads available		  
5. Wetted materials - SS / Haynes 214
6. Size without connectors (approx.) - Ø 27 x 22 mm  
Pressure Transducers-MI-3120-CTECTU8000
Microcomm's Pressure transmitters for many industrial liquids and gases series MI-3120-CTECTU8000.
Features:
  • Gage or absolute pressure
  • For many industrial gases and liquids
  • Field interchangeable
  • For industrial use
Technical Specifications:
1. Pressure Ranges    
  Absolute - 0...1 to 0...100 bar
0...15 to 0...1500 psi		  
  Vacuum Gage - 0...-1 bar
0...-15 psi		  
  Gage (pressure/vacuum) - 0...±1 bar
0...±15 psi
Gage - 0...1 to 0...100 bar
0...15 to 0...1500 psi
2. Output signal options - 0...5 V, 0...10 V, 0.5...4.5 V, 4...20 mA  
3. Non-linearity, hysteresis and repeatability (typical, combined) - ±0.1 %FSO  
4. Pressure connection - G 1/8, G 1/4, 1/8 NPT, 1/4 NPT
other connecting threads available		  
5. Wetted material - SS 1.4404 (316L) / Al2O3 / NBR
6. Size without connectors (approx.) - Ø 22 x 52 mm  
Pressure Transducers-MI-3120-CTECTU9000
Microcomm's Pressure transmitters for many industrial liquids and gases series MI-3120-CTECT9000.
Features:
  • Gage or absolute pressure
  • Field interchangeable
  • For industrial use
  • All welded stainless steel diaphragm construction
Technical Specifications:
1. Pressure Ranges    
  Absolute - 0...1 to 0...35 bar
0...15 to 0...500 psi
  Vacuum Gage - 0...-1 bar
0...-15 psi		  
  Gage (pressure/vacuum) - 0...±1 bar
0...±15 psi		  
Gage - 0...0.35 to 0...35 bar
0...5 to 0...500 psi		  
2. Output signal options - 0...5 V, 0...10 V, 0.5...4.5 V, 4...20 mA  
3. Non-linearity and hysteresis (typical, combined) - ±0.2 %FSO  
4. Pressure connection - G1/8, G1/4, 1/8 NPT, 1/4 NPT
other connecting threads available		  
5. Wetted material - SS 1.4404 (316L) / SS 1.4571 (316ti)  
6. Size without connectors (approx.) - Ø 22 x 65 mm  
Pressure Transducers-MI-3120-KTEKTU3000

Microcomm's Highly media resistant pressure series MI-3120-KTEKTU3000. The KTE3000 series is ideally suited for use with corrosive and aggressive liquids and gases. The media wetted housing material is manufactured from a highly chemical resistant PPS plastic (Polyphenylensulfide). The transmitters are based on proven ceramic technology with excellent media compatibility.

MI-3120-KTEKTU3000 sensors can be calibrated according to individual customer requirements in the range of 0.5 to 100 bar (7.5 to 1500 psi) with gage, vacuum or absolute pressure options. Several current or voltage output signals are available. A G1/4 male thread and a DIN43650 plug are supplied as standard pressure and electrical connections. Many other options are possible on customer request. All KTE3000 transmitters are EMC compliant and CE-marked.

Typical applications of the MI-3120-KTEKTU3000 can be found in the machine building, plant engineering and chemical industries. Furthermore, these transmitters offer unique advantages in medical and analytical instrumentation when high media compatibility is critical.

Features:
  • High compatibility with corrosive and aggressive media
  • Chemically resistant PPS plastic housing
  • Customer specific calibrations in the range of 0.5 to 100 ba
  
Technical Specifications:  
1. Pressure Ranges      
  Absolute - 0...1 to 0...50 bar
0...15 to 0...750 psi		  
  Vacuum Gage - 0...-1 bar
0...-15 psi		  
  Gage (pressure/vacuum) - 0...±1 bar
0...±15 psi		  
Gage - 0...1 to 0...100 bar
0...15 to 0...1500 psi		  
2. Output signal options - 0...5 V, 0...10 V, 0.5...4.5 V, 4...20 mA  
3. Non-linearity, hysteresis and repeatability (typical, combined) - ±0.15 %FSO  
4. Pressure connection - G 1/4
other connecting threads on request		  
5. Wetted material - PPS / Al2O3 / NBR
6. Size without connectors (approx.) - Ø 27 x 68 mm
Pressure Transducers-MI-3120-KTEKTU6000
Microcomm's Pressure transmitters for many industrial gases and liquids series MI-3120-KTEKTU6000.
Features:
  • For many industrial gases and liquids
  • Field interchangeable
  • For industrial use
  • Flush mount versions
Technical Specifications:
1. Pressure Ranges    
  Absolute - 0...1 to 0...400 bar
0...15 to 0...6000 psi
  Vacuum Gage - 0...-1 bar
0...-15 psi		  
  Gage (pressure/vacuum) - 0...±1 bar
0...±15 psi		  
Gage - 0...1 to 0...400 bar
0...15 to 0...6000 psi		  
2. Output signal options - 0...5 V, 0...10 V, 0.5...4.5 V, 4...20 mA  
3. Non-linearity, hysteresis and repeatability (typical, combined) - ±0.1 %FSO  
4. Pressure connection - G 1/4, G 3/8, G 1/2, 1/4 NPT, 7/16 UNF, flush mount
other connecting threads available		  
5. Wetted material - SS 1.4404 (316L) / Al2O3 / NBR  
6. Size without connectors (approx.) - Ø 27 x 68 mm  
Pressure Transducers-MI-3120-BTEPTE2000
Microcomm's Precision stainless steel pressure transmitters for corrosive media series MI-3120-BTEPTE2000.
Features:
  • For corrosive media in harsh environments
  • Field interchangeable
  • All welded stainless steel diaphragm construction
Technical Specifications:
1. Pressure Ranges    
Gage 0...0.35 to 0...35 bar
0...5 to 0...500 psi
2. Output signal options - 1...6 V, 4...20 mA  
3. Non-linearity and hysteresis (typical, combined) - ±0.2 %FSO  
4. Pressure connection - G 1/8, 1/8 NPT, 1/4 NPT, 3/8 NPT
other connecting threads available		  
5. Wetted material - SS 1.4404 (316L) / SS 1.4571 (316ti)  
6. Size without connectors (approx.) - Ø 34 x 56 mm  
Pressure Transducers-MI-3120-BTEPTE6000
Microcomm's Pressure transmitters for corrosive media series MI-3120-BTEPTE6000.
Features:
  • For corrosive media
  • Flush mount versions
  • Field interchangeable
  • For harsh environments
Technical Specifications:
1. Pressure Ranges      
Absolute - 0...1 to 0...350 bar
0...15 to 0...5000 psi		  
Vacuum gage - 0...-1 bar
0...-15 psi
Gage (pressure/vacuum) - 0...±1 bar
0...±15 psi
Gage   00...0.2 to 0...350 bar
0...3 to 0...5000 psii		  
2. Output signal options - 0...10 V, 1...6 V, 0...20 mA, 4...20 mA  
3. Non-linearity and hysteresis (typical, combined) - ±0.1 %FSO  
4. Pressure connection -
G 1/2, G 3/4, 1/4 NPT, flush mount: G 3/4, 1 UNF
other connecting threads available
  
5. Wetted material - SS 1.4404 (316L) / NBR  
6. Size without connectors (approx.) - Ø 27 x 74,5 mm  
Pressure Transducers-MI-3120-BL
Microcomm's High pressure transmitter for corrosive media series MI-3120-BL.
Features:
  • absolute, gage or sealed gage
  • For corrosive liquids and gases
  • Flush mount diaphragm
  • Intrinsically safe
    (when used with appropriate barriers)
Technical Specifications:
1. Pressure Ranges    
  Absolute - 0...15 to 0...50 psi
(0...1 to 0...3.5 bar)
  Gage - 0...5 to 0...20000 psi
(0...0.35 to 0...1400 bar)
2. Output signal options - 4...20 mA  
3. Non-linearity, hysteresis and repeatability (max., combined) - ±1.0 %FSO  
4. Pressure connection - flush mount  
5. Wetted material - SS 1.4404 (316L) or SS 15-5 PH  
6. Size without connectors (approx.) - Ø 21 x 79 mm  
Pressure Transducers-MI-3120-KTEKTU3000CS

Microcomm's Highly media resistant submersible level sensor series MI-3120-KTEKTU3000CS. The submersible sensor series MI-3120-KTE3000CS is ideally suited for level measurement of highly corrosive and aggressive media. These transmitters offer high precision hydrostatic pressure measurement from 2.5 m water column (250 mbar). The housing material is manufactured from a highly chemical resistant PPS plastic (Polyphenylensulfide). The transmitters consist of highly accurate and long-term stable pressure sensor elements based on proven ceramic technology with excellent media compatibility.

All MI-3120-KTE3000CS level probes are compensated for temperature and air pressure fluctuations and supply a 4...20 mA output signal. They can be widely customised to meet specific customer requirements. MI-3120-KTE3000CS transmitters are EMC-compliant and CE-marked.

Typical applications include level control of salty waters and all chemical and industrial level measurements where excellent resistance to highly corrosive and aggressive media is critical.
Features:
  • Chemically resistant PPS plastic housing
  • Excellent media compatibility
  • Compensated for temperature and air pressure fluctuations
  • Custom versions available
Technical Specifications:
1. Pressure/ levelRanges    
Gage - 0...0.25 to 0...2 bar
0...2.5 to 0...20 m H2O
0...5 to 0...30 psi
0...12 to 0...70 ft H2O
2. Output signal options - 4...20 mA  
3. Non-linearity, hysteresis and repeatability (typical, combined) - ±0.1 %FSO  
4. Wetted material - SS 1.4404 (316L) / SS 1.4571 (316ti)  
5. Size (approx.) - Ø 28 x 125.5 mm  
Pressure Transducers-MI-3120-KTEKTU6000
Microcomm's Precision stainless steel pressure transmitters for corrosive media series MI-3120-KTEKTU6000.
Features:
  • Gage or absolute pressure
  • For many industrial gases and liquids
  • Field interchangeable
  • For industrial use
Technical Specifications:
1. Pressure Ranges    
  Absolute - 0...1 to 0...400 bar
0...15 to 0...6000 psi
  Vacuum gage - 0...-1 bar
0...-15 psi
  Gage (pressure/vacuum) - 0...±1 bar
0...±15 psi
  Gage   0...1 to 0...400 bar
0...15 to 0...6000 psi
2. Output signal options - 0...5 V, 0...10 V, 0.5...4.5 V, 4...20 mA  
3. Non-linearity, hysteresis and repeatability (typical, combined) - ±0.1 %FSO  
4. Pressure connection - G 1/4, G 3/8, G 1/2, 1/4 NPT, 7/16 UNF, flush mount other connecting threads available  
5. Wetted material - SS 1.4404 (316L) / Al2O3 / NBR  
6. Size without connectors (approx.) - Ø 27 x 68 mm  
Pressure Transducers-MI-3120-HYD

Microcomm's Precision stainless steel pressure transmitters for corrosive media series MI-3120-HYD. The HYD transmitter offers high precision hydrostatic level measurement for pressure ranges from 1 m water column (100 mbar). The HYD level probe features a compact and rugged stainless steel housing, incorporating a flush mounted laserwelded diaphragm and achieves a long term stability of <±0,1 %FSS/year. The HYD transmitters are compensated for temperature and air pressure fluctuations and provide a 4...20 mA output signal. An intrinsically safe version of the transmitter according to ATEX II 1G (EEx ia IIc T4) is available for use in hazardous areas. Custom specific calibrations and different cable lengths are available on request.

Application examples are the level measurement in waterworks, deep wells, tanks, reservoirs, etc.

Features:
  • Gage pressure
  • For corrosive media
  • Field interchangeable
  • Option: Intrinsically safe (EEx ia llc T4)
Technical Specifications:
1. Pressure / Level Ranges    
Gage 0...0.1 to 0...4 bar
0...1 to 0...40 m H2O
2. Output signal options - 4...20 mA
(HART®, PROFIBUS-PA®, EEx ia llc T4 on request)		  
3. Non-linearity, hysteresis and repeatability (max., combined) - ±0.2 %FSO  
4 Size without connectors (approx.) - Ø 50 x 165 mm  
Custom Pressure Transducers-
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

 

 
 
 
 
| Home | Vision | Data Acquisition Systems | Networked DAS | Industrial Sensors | Vehicle Tracking Systems | Enquiry | Members Area |
| Employees Area | Knowledge Base | Technical Forum | Application Support| Installation & Training | Store | Links | Contact |