MICROCOMM's
Single Industrial Parameter Displacement
Meter/ Logger/ Recorder series
MI-1430-DSM are
state-of-the-art systems, based
on a well proven mil-grade Displacement
Sensor. The Displacement Sensor is based
on a PT1000 sensing element. The sensor
is designed to operate in a harsh environments
including that for marine and defence
applications. It can work in extremes
of weather conditions and has a specially
designed radiation screen to protect it
from direct sunlight. It is also protected
against ingress of moisture, dust and
smoke. The sensor data is conditioned
according to its calibration coefficients
to give an output on the Display or to
the Data Logger or to the Display-Printer
Paper Recorder.
The
systems are offered in three standard
versions as under :
Displacement
Meter :Displacement
Sensor with Display Unit:
The
Displacement Sensor is attached to a microprocessor
based Display Unit which has an LCD graphics
display built-in. Instant Displacement
data is displayed on the LCD screen in
2 modes, ie Graph & Bar. The Display
Unit has a 4x6 keypad to set up the unit
and a slot for Microcomm's standard plug-in
Memory Modules. Serial Port Output is
provided on the Display along with a data
port for plugging in a choice of Telemetry
options.
Displacement
Logger :Displacement
Sensor with Auto Data Logger:
Uses
the standard Microcomm Data Logger with
the Displacement Sensor in this configuration.
The Data Logger has a built-in 2x16 VFD
display and a 4x6 keypad to set up the
unit and display instant data. Plug-in
Memory Modules is a standard feature along
with optional GPS Receiver which tags
the location parameters to the datasets
besides setting up the RTC periodically.
It has a provision for two simultaneous
Telemetry Modules from the choice of options
available in the Microcomm range and a
standard Serial RS232C or 422 Port.
Displacement
Graph :Displacement Sensor with Display
/ Hardcopy Printer:
The
Displacement Sensor is attached to a microprocessor
based Display Unit which outputs data
continuously to a hardcopy Printer attached
to it. The Display Unit has an LCD graphics
display built-in. Instant Displacement
data is displayed on the LCD screen in
2 modes, ie Graph & Bar. The Display
Unit has a 4x6 keypad to set up the unit
and a slot for Microcomm's standard plug-in
Memory Modules. Serial Port Output links
the Display to the hardcopy Printer for
continuous charts. Telemetry options can
be used in this configuration by connecting
them to the Display Unit.
Special
Systems can also be configured according
to user requirements |
